Probe for Dissolved & Gaseous Oxygen Measurements
The OXYPro is connected directly to the controller. It combines an optical sensor and electro-optical module in one probe. As a digital interface it uses RS485 (PreSens proprietary or Modbus RTU) and has 4 - 20 mA analog output. The optical oxygen sensor type PSt7 has a maximum measurement range of 0 - 100 % O2, and a detection limit of 0.03 % O2. The probe is pre-calibrated, stands steam sterilization (SIP) and cleaning in place (CIP).
The OXY-1 WM is a precise single-channel oxygen meter for wall mounting. It is temperature, salinity and pressure compensated and can be used with sensor spots, flow-through cells and oxygen probes for in-line measurement. OXY-1 WM is compatible with sensors type PSt3 (detection limit 0.03 % oxygen, 15 ppb dissolved oxygen). The housing and all connector ducts are splash-proof (protection class IP64) so the device can be installed even in harsh industrial environments.
Compact Fiber Optic Oxygen Meter
Due to its small outer dimensions OXY-1 SMA can be set up almost anywhere. It is compatible with non-invasive sensors, dipping probes and flow-through cells of type PSt3 (detection limit 15 ppb dissolved oxygen, 0 - 100 % oxygen). OXY-1 SMA has temperature compensation, so most precise measurements in environments with changing temperature can be taken.
Am Biopark 11
Phone: +49 941 94272100
Fax: +49 941 94272111
Get in contact with German companies in 3 easy steps! With one single question you can reach all relevant German Pavilion exhibitors of your selected industrial branch.
Click here if you notice an image that violates copyright or privacy rights.